Sheet Runners (SR)
Vertical movement of SR2 is done by a Movimot Flexible + DRN AC drive.
Due to mechanical limits MM adv cannot be fitted.
The thickness of the powder coating must be at least between 60µm and 90µm per layer. With a primer and a topcoat, the thickness is at least 120-180µm.
When having an EPD coating, an extra 18-25µm is added.
EPD coating is a pretreatment before powder coating, which makes the coating more resistant to e.g. moisture environments.
Yes, the machine can be supplied with EPD (KTL) coating.
This depends on the motor and the customer’s preference. We use brake voltage 400V AC as standard.
Vertical movement of SR2 is done by Movimot Flexible + DRN AC drive.
Due to mechanical limits MM adv cannot be fitted.
This depends on the motor and the customer’s preference. We use brake voltage 400V AC as standard.
Bearings we have installed do not need to be lubricated. Installed bearings are sealed bearings (ZZ and 2RS) and are factory-filled with grease. They cannot be re-lubricated. These bearings have a maintenance-free lifespan. Re-lubrication is not necessary; instead, in case of wear or reduced performance, the bearings should be replaced.
The machines are not suitable for ATEX environments. It has not been designed or certified for use in explosive atmospheres as defined by ATEX standards.
FCA/CIF/DDP/DAP
We pack our products on wood with an heat treatment. When the shipment goes overseas we use VCI worthy foil to ensure that the shipment is free of moisture and dust.
Yes, all our wood is treated against pests by a heat treatment and meets the world wide ISPM 15 standard.
